|
Product Data Sheet |
|
Product Description |
Kryptaglow® Regular and Super Glow Paints are to be
used in conjunction with the Kryptaglow® Clear Topcoat on a clean
preferably white surface. The
Super, when applying three coats, can act as its own base coat instead of
using a white base coat if applied to a clean dry surface. The Kryptaglow® Paint line is a
solvent base paint used to paint safety egress systems used for evacuation of
high rises, schools, etc. It is
designed to high standards of performance needed to guide the way when
situations arise and a well-marked evacuation routing is paramount. Kryptaglow® will meet and exceed
the standards needed for performance in these areas. The Super can be used to create
levels of glow higher than normally required giving more usage in many other
areas of industry, for machinery, etc.
When exposed to a black light Kryptaglow® products will charge to
an exceedingly high level as well as exposure to sunlight. Heat will charge Kryptaglow® if
over 94° F. Under normal
lighting condition Kryptaglow® will charge by exposure to light very
quickly and will continue to charge as long as exposure continues. It will then maintain its glow for
several hours making it possible to see longer after the normal evacuation
time. The uses for Kryptaglow® paints are endless. Anywhere you would like the surface
to glow use Kryptaglow®. |
|
|
Physical Properties |
Weight
Solids Volume
Solids Resin
Type Gloss Theoretical
Coverage Weight
per Gallon VOC
Viscosity
@ 77° F |
55.52% 40.03% Modified
Alkyd N/A 633.33
ft2 @ 1 mil 8.9
lbs. 4.4
lbs./gallon 74
– 76 KV |
|
Reduction |
Kryptaglow®
Regular and Super can be reduced with most aromatic solvents. Xylene would be the recommended
“fast” reducer for application in cooler temperatures, D-100 can
be used as a slow reducer to help the applied coating flow during warmer
conditions. |
|
|
Application |
Three coats should be applied to a white or
light colored surface. Kryptaglow®
Clear Topcoat should be used as a sealer. Can be sprayed, brushed or rolled. All Kryptaglow® products charge
with light and are enhanced with black UV lights. For safety data refer to MSDS. It is quick drying in about 30 minutes. A coat of Kryptaglow® Clear Topcoat
should also be applied for best performance and durability. Kryptaglow® paints will charge
rapidly in sunlight or using a black light. Charge times vary with exposure and strength of charging
source. |
|
|
dry times |
Kryptaglow®
Regular and Super Glow Paints will dry to handle in about one hour depending
on thickness of application, humidity, temperature and air movement. Dry through times may take several
days or more. Full adhesion will
be gained after 4-7 days drying time.
Always check for evidence of lifting before proceeding with a full
topcoat. Lifting will typically
occur between 8 – 48 hours. |
|
|
Clean-up |
Use xylol to flush paint lines. |
|
|
Safety Precautions |
Contains aromatic solvents
Vapor and spray mist harmful Use proper respiratory protection Refer to MSDS for specific information For
more detailed recommendations, please contact your local Kryptaglow
Representative |
Co-Leash, Inc.
P.O. Box 272672
Tampa, FL 33688
(P) 813/920-1910 (F)
813/792-1418
www.kryptaglow.com