|
For Exit Path or
Egress System Markings |
Generally
in pholuminescent paints the thicker the coats the better they glow. Our Krytpaglow® #1300 paint has
been especially formulated to achieve this in 3 properly applied coats.
Important! Make sure Kryptaglow® paints are well
stirred and mixed getting all materials off the bottom of the can. Mix periodically while using to ensure
even flow of active ingredients.
They
can be applied to any clean prepared surface they will adhere to.
Step
1. Apply Kryptaglow® White Base Coat
#1171 to clean prepared surface. 1
or 2 coats as needed using a 4” roller or brush. Achieving consistent white base coat,
let dry. We used a 4”
roller.
Step
2. Apply 3 generous coats of
Kryptaglow® #1300 Glow Paint with a 4 inch trim roller and a ½ inch
to ¼ inch nap. 3/8 inch nap
will also work and is recommended for easy rolling. First coat dries in 20-30 minutes. Second coat needs longer drying time and the third coat is
the longest taking about an hour or longer depending on your conditions.
Step
3. Apply 1 thin coat of
Kryptaglow® Protective Top Coat #1102 with a short nap roller. We used a Sure Line 3” Trim
Roller. Allow to dry.
All
Paints are Latex Water Base and can be cleaned with water.
Additional
Directions for use under NYC LL 26/04:
New
Line Markings: Read and understand local law 26 and New York City Building Code
Reference Standard Law 26 and RS 6-1 prior to the use of this product to create
markings which comply with specifications set forth therein. These regulations will be downloadable
at our site www.kryptaglow.com .
(After MEA is Issued)
Pholuminescent
emergency egress line marking dimensions which may be created with this paint
product are defined under Local Law 26 and RS 6-1, and may be only as line
marking paint for these purposes.
It
is the responsibility of the professional user to be familiar with Local Law 26
and RS 6-1 to achieve compliance
using this product. Generally a
20mil wet thickness to create a 10mil over white. Where no such white color exists, Kryptaglow® White Base
Coat #1171 is required for use.
Co-Leash, Inc.
P.O. Box 272672
Tampa, FL 33688
(P) 813/920-1910 (F)
813/792-1418
www.kryptaglow.com